Basketweave flooring pattern
Basketweave builds square blocks of two to five parallel boards and alternates their direction, so the floor weaves like a basket. It is the classic parquet of pre-war apartments — geometric, busy, and forgiving to lay because each block is small and self-contained.
The block maths must close: the board length has to equal the block side (boards per block × board width), or the weave drifts. The designer checks your board size against the block and shows the clipped blocks at every wall.
Measured, not folklore: in our 2026 simulation dataset, optimised basketweave layouts wasted 21% mean (20.4–21.6% in typical rooms) across 250 simulated rooms. See how every pattern compares.
Planning a basketweave floor
Blocks must square up
With 2 boards per block, the board length must be exactly twice its width; with 3 (Haddon Hall), three times, and so on. Off-module boards cannot weave.
Centre the weave
Wall cuts slice through blocks, and a weave that starts from one wall finishes ragged on the other. Centre the block grid on the room so the clipped blocks mirror each other.
Ladder is the calm variant
Running every block the same direction with a half-block column offset gives ladder basketweave — the texture without the checkerboard busyness.
Frequently asked questions
- What board size do I need for basketweave?
- The board length must be an exact multiple of the board width — twice for the classic two-board weave, three times for Haddon Hall, up to five for mosaic panels. A 600 × 100 mm board weaves at 3 boards per block, for example, but not at 2.